Freeport Park Metal Free Standing Parasol Base
Once you have installed this parasol base once, it will not need to be replaced again. Installation guide: Dig a 40 x 40 x 40cm hole in the ground. Pay attention to the individual metal teeth and the position of the rotating plate. Turn the bottom plate and tighten the umbrella pole pipe and bottom plate screws. Make sure that the two parts are connected together and there is no cement in the threaded hole. Fill the hole with cement so that the base is embedded in it. With a shovel or other suitable tool, press the cement firmly. Use a spirit level to check the orientation of the frame, as the position cannot be changed after the cement is set. The setting of the cement will take around three days. After which, you can finish installing your parasol. Notes: Attention: The Freeport Park Universal Metal Stand is suitable for most umbrellas with M8 screws. Please check first that your umbrella will be suitable. Please follow the assembly instructions.
Features:- Universal metal base with stainless steel cover for long lifespan, no further exchanges required. The mounting pate is 17 x 17cm, total height (approx.): 40cm
- Stability: The interlocking teeth and the position of the rotating plate ensure that the base remains stable in the ground. Space saving: After the base is installed, it is almost completely underground. The pedestal is hardly noticeable if you are not using the parasol on it
- Includes: 1 x universal metal base, 1 x user manual, 1 year warranty
- Stainless steel cover for long life, rust and corrosion resistant powder coated steel mast frame
- Colour: Matt brushed nickel
- Material: Metal
- Material Details: With stainless steel cover
- Pieces Included: 1 metal base and 1 user manual
- Wheels Included: No
- Removable Wheels:
- Locking Wheels:
- Base Placement: Free standing base
- Pole Diameter: 8
- Country of Origin: China
- Durability: Rust Resistant
- Umbrella Compatibility:
- Supplier Intended and Approved Use: Residential Use
- Stiftung Warentest Note:
- CE Certified:
- ISO 14000 Certified:
- ISO 9000 Certified:
- TÜV Rheinland Certified:
- CSA Certified:
- LEED Project Appropriate:
- OSHA Compliant:
- CPSIA Compliant:
- UKCA Marked: No
- General Product Safety Directive Compliant: No
- REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) Compliant: No
- GS (Geprüfte Sicherheit) listed: No
- GREENGUARD Certifications:
- GREENGUARD Certified:
- GREENGUARD Gold Certified:
- Greenguard / Greenguard Gold Certification Number:
- Overall Height - Top to Bottom: 39
- Overall Width - Side to Side: 16
- Overall Depth - Front to Back: 16
- Base Diameter: 8
- Overall Product Weight: 0.32
- Dig a 40 x 40 x 40cm hole in the ground. Pay attention to the individual metal teeth and the position of the rotating plate. Turn the bottom plate and tighten the umbrella pole pipe and bottom plate screws. Make sure that the two parts are connected together and there is no cement in the threaded hole. Fill the hole with cement so that the base is embedded in it. With a shovel or other suitable tool, press the cement firmly. Use a spirit level to check the orientation of the frame, as the position cannot be changed after the cement is set. The setting of the cement will take around three days. After which, you can finish installing your parasol.
- Additional Tools Required:
- Adult Assembly Required: No
- Tools Needed for Assembly:
- Commercial Warranty: No
