HyperX Fury White Series 4GB 1333MHz DDR3 CL9 DIMM Memory

Ebuyer.com £32.99 Go to Ebuyer.com First seen in Apr 2018

Price Tracked On This Product

Highest price was seen £33.48 on 14 Aug 2018

Lowest price was seen £32.99 on 23 Aug 2018

Average price is £32.99 base on 4 price changes

Most recent price is £32.99

Description

SPECIFICATIONS CL(IDD) 9 cycles Row Cycle Time (tRCmin) 49.125ns (min.) Refresh to Active/Refresh 260ns (min.) Command Time (tRFCmin) Row Active Time (tRASmin) 36ns (min.) Maximum Operating Power TBD W* UL Rating 94 V - 0 Operating Temperature 0oC to 85o C Storage Temperature -55oC to +100o C *Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 667MHz fCK for 1333Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 9, 8, 7, 6 • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB : Height 1.180” (30.00mm), single sided component