HyperX Savage 16GB Kit (4x4GB) DDR4 2800MHz Intel XMP CL14 DIMM Memory

Ebuyer.com £134.98 Go to Ebuyer.com First seen in Dec 2016

Price Tracked On This Product

Highest price was seen £134.99 on 22 Aug 2017

Lowest price was seen £134.98 on 03 Sep 2017

Average price is £134.98 base on 2 price changes

Most recent price is £134.98

Description

HyperX Savage 16GB Kit (4x4GB)- DDR4 2800MHz Intel XMP CL14 DIMM Memory HyperX HX428C14SB2K4/16 is a kit of four 512M x 64-bit (4GB) DDR4-2800 CL14 SDRAM (Synchronous DRAM) 1Rx8, memory modules, based on eight 512M x 8-bit FBGA components per module. Total kit capacity is 16GB. Each module supports Intel XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-2800 at a low latency timing of 14-16-16 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows: XMP TIMING PARAMETERS JEDEC: DDR4-2133 CL15-15-15 @1.2V XMP Profile #1: DDR4-2800 CL14-16-16 @1.35V XMP Profile #2: DDR4-2666 CL14-15-15 @1.35V SPECIFICATIONS CL(IDD) 15 cycles Row Cycle Time (tRCmin) 46.5ns (min.) Refresh to Active/Refresh Command Time (tRFCmin) 260ns (min.) Row Active Time (tRASmin) 33ns (min.) Maximum Operating Power TBD W* UL Rating 94 V - 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC Power will vary depending on the SDRAM used. FEATURES Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP - 2.5V Typical VDDSPD = 2.25V to 3.6V On-Die termination (ODT) 16 internal banks; 4 groups of 4 banks each Bi-Directional Differential Data Strobe 8 bit pre-fetch Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop) Height 1.36” (34.57mm)