Mendes Mirage Internal Oak Pre-Finished Grooved Glazed Fire Door 686mm Engineered
Description
Crown Cut Oak cross directional veneered faces with feature ash veneer inlay in both stiles, the door has an open pore clear satin lacquer finish. This 44mm door has a solid construction with clear flat toughened glass. , Pre-Finished - ready to install , FD30 fire protection rating , Clear flat glazing , Ash inlay , 10-year manufacture guarantee , FSC Certified Please note, these doors are bespoke and are therefore non-returnable. Dimensions Sizes available 1981 x 686mm x 44mm1981 x 762mm x 44mm1981 x 838mm x 44mm Technical information If a door needs to be trimmed it must be reduced equally from both sides. Each side of a door may be trimmed up to a maximum of 6mm for doors with a lipping 10mm or more, and 3mm for doors with a 6mm lipping. Please note any trimming over the 6mm overall for the fire doors will invalidate the FD30 rating We recommend the use of 3 hinges to offer more rigidity and strength. Untreated products must be fully sealed prior to hanging – this applies to all surfaces including tops, bottoms and all recesses cut for hinges, locks, handles and letter plates etc. Waxes and oils are not considered suitable for sealing a door and if used will invalidate any guarantee should the door subsequently fail.. Mendes Mirage Internal Oak Pre-Finished Grooved Glazed Fire Door 686mm Engineered Oak
You may also like
loading
Discover more
