Nukeproof Neutron V2 Rear Wheel - Shimano / Sram (9/10/11)148 x 12mm Boost27.5 Inch

Tweeks Cycles £144.49 £169.99 Go to Tweeks Cycles First seen in Dec 2022

Description

The Neutron V2 Rear Wheel from Nukeproof has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.Rim Material: 6066 AlloyUse: MTB, Trail, All Mountain, Enduro and DHWheel Size: 27.5" or 29" options availableSpacing Options: 142x12mm, 148x12mm, 150/157x12mmConversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately)Rear Hub Engagement: 36 points of engagement (every 10°)Freehub Options: Shimano HG, Shimano Micro spline, or SRAM XDSpoke Type: J-BendSpoke Count: 32Lacing Pattern: 3xDisc Mount: 6-boltInner Rim Width: 28mmExternal Rim Width: 32mmRim Height: 18mmTubeless Ready: Yes Pre-taped and valve suppliedSingle or Pair: SingleBuild: Hand builtWeight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeThe 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH. Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.