Description
Enhance the natural beauty of your wood with Fiddes Finishing Oil. A blend of quick drying, durable natural oils and resins formulated to maintain previously oiled interior surfaces.ApplicationEnsure all surfaces are clean, dry, and free from any previous finish. Sand the substrate with a fine 150 grade Ensure all areas to be coated are extremely well ventilated during and after application. Always test on a small area prior to initial application. No primer required. Maximum 2 coats recommended. Apply at room temperature. Fiddes Finishing Oil is formulated for application directly, and does not require thinning. paper or 150 grit sanding disk, removing all traces of dust.First CoatStir contents thoroughly before and during use, and apply in a warm, well ventilated room. Apply THINLY using a good quality bristle or synthetic brush, and lay EVENLY, following the direction of the grain. Leave to dry 4-6 hours in warm, dry well ventilated conditions, or preferably overnight.Second CoatApply as first coat, THINLY, allowing good ventilation. Leave to dry 4-6 hours in warm, dry well ventilated conditions, or preferably overnight. Clean applicator with White Spirit.RenovationTo renovate previous application of Fiddes Finishing Oil, lightly sand area with 150 grit sandpaper, and re-apply sparingly.CoverageA single application will cover approximately 20-24 square meters per litre,depending on the density of the substrate.
You may also like
loading