Forclaz Decathlon Waterproof Mountain Walking Jacket

Waterproof:100% taped seams. 3-layer membrane can resist a 25,000 mm water columnBreathability:30 cm side openings and component that wicks away perspiration (RET=6).Lightweight:Only 425 g in size MAnatomic design:Drawcord at the jacket hem adjustable sleeves with good coverage adjustable hoodPockets:4 Pockets: 2 hand zip pockets, 2 inside pockets (1 zip, 1 net)Freedom of movement:Stretch fabric (13% elastane), raglan sleeves for freedom of movement Cut: This jacket has a fitted cut. The fabric is 13% elastane and the “raglan” sleeves up to the collar give better stretchability and more freedom of movement during your hikes. A warm layer, such as a fleece or a light padded jacket can be worn underneath. You can choose your usual size, or a size above if you don't want it to be worn fitted. Hood: The adjoining hood is adjustable in height and depth thanks to an elastic drawcord. Stiff visor for maximum face protection. The small detail that makes the difference: a triangular opening on the side of the hood for better visibility to the sides. Construction of the jacket: 3 layers: This jacket is made up of 3 layers, the best protection there is on the market: the membrane is glued between the inner and outer component layer (hence it being called 3 layers). The membrane is a kind of very thin polyurethane film that makes the component waterproof while remaining breathable. It is protected by knitted fabric and has the advantage of being softer, lighter, more durable and often more breathable than a coating. How to look after your jacket: This jacket has taped seams (to ensure perfect waterproofing) which are vulnerable to machine washing and may peel off over time. We therefore recommend using a sponge and water to clean any marks on the jacket, and to machine wash it as little as possible at 30°C, if you want it to use it for trekking for as long as possible. Waterproofness test: Waterproofing is measured by a fabric's resistance to water pressure expressed in mm of water column (JIS 1092 standard) The higher the pressure, the more waterproof the fabric. The component of this product has a waterproof rating of 25,000 mm, i.e. it can withstand the pressure exerted by a 25,000 mm column of water. This is also equivalent to 25 000 Schmerbers. Breathability test: Component breathability is measured by its thermal evaporative resistance (RET). This is its capacity to let water vapour generated by the body during physical activity escape and therefore avoid water accumulating on the skin. The lower the RET, the more breathable the fabric.RET ≤ 6: very breathable fabric RET ≤ 12: breathable fabric RET ≤ 20: little breathabilityOur product has a 6 RET rating How do you restore the water repellent properties of your jacket?: The water-repellent property of a fabric is its capacity to make water run off its surface without absorbing it. This prevents the fabric from soaking up water and keeps it lightweight and breathable. The fabric is made water-repellent by treating its outer surface, however this property may deteriorate with use.All the steps to restore the water-repellent properties are below: https://conseilsport.decathlon.fr/conseils/comment-reactiver-la-deperlance-de-sa-veste-tp_22965 Recommended additional product: The MH500 over trousers protect the lower half of your body for a complete and effective rain protection system for your mountain outings. OUR ENVIRONMENTAL APPROACH: Because we are aware that we must act to preserve our playground, Quechua is committed to limiting the environmental impact of its products. Thanks to a more high-tech component, our MH500 jackets are lighter, reducing their CO2 emissions by 28% on average. This is still not enough and that's why we are working to make this jacket 100% eco-designed one day.