StoneCare4U Colour Boost Slate Sealer
Description
Upgrade any ordinary slate surface with the Stonecare4U Colour Boost Slate Sealer. Its eco-friendly formula effectively seals slate and other porous surfaces while enhancing their natural beauty. It offers powerful yet eco-friendly high-quality stain protection and can be applied to both, external and internal surfaces. How to apply: Remove any loose debris from the work surface before you start work and ensure you have adequate safety wear, i.e. gloves, suitable protective eyewear, face mask and clothing. Leave the surface for a minimum of 72 hours with clear and dry weather to ensure that it is completely dry and ready to be sealed. In the same vein, make sure weather conditions are favourable before commencing. The application temperature should range between 15° to 23°C. The first coat of the sealer can be applied with a low-pressure sprayer, roller, natural fibre brush or sponge. Above all, do not dilute the product. Make sure that any excess sealer is completely removed from the slate surface after 20 to 30 minutes. A second application is to be applied 45 to 60 minutes later for best results. It is important that the stone surface is kept completely dry throughout the curing process, which can take up to 72 hours. If not, unsightly white patches can appear which would be due to the sealer drying inconsistently. Please Note: The colour and/or appearance of the stone will be changed when this product is applied. Therefore, always try the product in an inconspicuous area prior to use. Any surfaces which are not to be sealed can be protected with masking material. This product is not suitable for Kandla Grey (mid & light grey) sandstone. Maintenance: You can clean sealed areas with a mild, pH-neutral cleaner or a very low concentration of our outdoor cleaner range. Do not use harsh or abrasive cleaning agents as this can have a negative effect on the treated surface. Not recommended for non-porous surfaces.
You may also like
loading