StoneCare4U Essential Brick Sealer
Description
Ensure a quick and easy solution for brick surfaces with the StoneCare4U Essential Brick Sealer 25L. Perfect for brickwork, masonry and porous vertical stone surfaces. Formulated with technical synthetic resins that seal and protect brick surfaces. The sealer offers excellent water repellence and helps to reduce efflorescence, green growth and algae growth. It offers long-lasting protection and once sealed, the brick requires very little maintenance. Ready to apply straight from the bottle, the quick and easy solution to sealing your brickwork. How to apply: Before use, remove any loose debris from the work surface and ensure you have adequate safety wear, i.e. gloves, suitable protective eyewear, FFP3 class mask and clothing. Do not apply at temperatures below 8 degrees Celsius. Certainly, it is important to perform a small test application in an inconspicuous area before use. This will indicate the suitability and effectiveness of the product for your surface. If unsuitable for your requirements, Do not proceed but contact us to return the product. Before application, the surface must be completely clean and dry. Application methods include a low-pressure sprayer, roller, natural fibre brush or sponge. Apply Essential Brick Sealer, to saturation, two coats “wet on wet” are needed to ensure complete coverage. Do not dilute. Surface dry after 45 to 60 minutes. If rain is forecast or starts, then stop treatment immediately and cover the freshly impregnated areas, the surface is required to stay completely dry for the first 6 hours after application. Please note: The sealer may delicately enhance the natural colour of the brick surface – always try the product in an inconspicuous area prior to use. Surfaces that are not to be sealed should be protected with masking material.
You may also like
loading