Tenda IP-COM Networks G1124P-24-250W network switch Unmanaged Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U Grey

Compliant with IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.3ab IEEE802.3af IEEE802.3at<br/>Store & forward share memory non-blocking architecture<br/>Supports MAC address self-learning and auto MDI/MDIX<br/>Provide 24 10/100/1000Mbps auto-negotiation ports with 24-port PoE<br/>Ports 1-24: IEEE 802.3af/at PoE ports<br/>Supports full-deplux 802.3x flow control and half-duplux backpressure flow control<br/>Supports 8K MAC address list MAC address learning and auto-ageing<br/>Supports port Inductive Lightning Protection up to 6KV<br/>maximum power output of the switch: 225W<br/>Hardware DIP switch for selection among the Standard CCTV VLAN and Isolation modes.<br/><br/>G1124P-24-250W is a IP-COM switch that offers 24 10/100/1000M RJ45 ports.Ports 1-24 comply with the IEEE802.3af standard (maximum PoE power output : 15.4w) and 802.3at standard (maximum PoE power output: 30 W). The switch offers a maximum PoE power output of 225W and can supply power to exchange data with APs IP cameras and IP phones through CAT5e cables. It also provides simple management modes such as CCTV VLAN and Isolation to help reduce cabling costs of IP terminals : APs and IP cameras.<br/><br/>24 x 10/100/1000 Mbps auto-negotiation RJ45 ports up to 2000 Mbps of full duplex transmission rate line-speed forwarding by all ports and large cache capacity ensure the timely transfer of large files and stable streaming video. Stay connected for 7*24.<br/><br/><B>225W PoE power supply</B><br/>Ports 1-24 comply with the IEEE802.3af and IEEE802.3at power supply standards. The entire switch offers a maximum PoE power output of 225W whereas each ports offers a maximum PoE power output of 30W. The ports can be used to supply power to and exchange data with APs and IP cameras.<br/><br/><B>Excellent Lightning-Proof design</B><br/>Integrated professional lightning-proof circuit which supports port and power supply lightning-proof (common mode protection 6KV). Effectively reduce the damage to the network system caused by the thundery weather.<br/><br/><B>4 Network operation modes offered</B><br/>Hardware DIP switch for selection among the Standard CCTV VLAN and Isolation modes. Hardware DIP switch to isolate ports to prevent broadcast storm and defend against DHCP spoofing .<br/><br/><B>Specifications</B><br/><br/><B>Standards and Protocol</B><br/>IEEE 802.3?IEEE 802.3u?IEEE 802.3x?IEEE 802.3ab?IEEE802.3af?IEEE802.3at<br/><br/><B>Indicators</B><br/>24 x Link/Act per device<br/>24 x PoE per device<br/>1 x Power per device<br/><br/><B>Interface</B><br/>24 x 10/100/1000Base-T ports(Data/Power)<br/><br/><B>Lightning Protection</B><br/>Lightning Protection 6KV<br/><br/><B>Store and Forward</B><br/>Yes<br/><br/><B>Exchange Capacity</B><br/>48 Gbps<br/><br/><B>Packet Forwarding Rate</B><br/>35.7Mbps<br/><br/><B>MAC Address Table</B><br/>8K<br/><br/><B>POE Supply Management</B><br/>Port 1-24 support IEEE802.3at/af PoE standard<br/><br/><B>POE Through Pin</B><br/>1 2 4 5 +;3 6 7 8 -<br/><br/><B>Voltage Input Range</B><br/>AC: 100-240V~50/60Hz<br/><br/><B>Dimensions</B><br/>440 x 178 x 44mm<br/><br/><B>Power Consumption</B><br/>In full configuration:<250W<br/>PoE Max Power Supply:225W<br/><br/><B>Port Features</B><br/>Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.<br/>CCTV: the port cache is optimized and PoE ports 1-8 have higher priorities over the other ports. All the ports of the switch can communicate with each other.<br/>VLAN: ports 1 to 22 are isolated from each other but can communicate with ports 23 and 24 (uplink ports) respectively.<br/>Isolation:ports 1 to 14 and ports 15 to 24 belong to two different VLAN.This mode can be used to isolate supervision network and wireless network to make them not interfere with each other.<br/>